Views: 3 Author: Site Editor Publish Time: 2022-11-08 Origin: Site
Fiber Reinforced Thermoplastic Composites
Fiber-reinforced thermoplastic composites are an important part of composite materials. Various thermoplastic resins are reinforced with glass fibers (GF), carbon fibers (CF), aramid fibers (AF) and other fiber materials, which are called FRTP ( Fiber Reinforced ThermoPlastics). Advanced fiber-reinforced thermoplastic composites have excellent properties such as high toughness, corrosion resistance and fatigue resistance, simple molding process, short cycle, high material utilization rate (no waste), and no need for low-temperature storage, and have become a research hotspot in the materials industry.
Typical performance benefits of FRTP
Thermoplastic composite FRTP has been used for decades. Compared with thermosetting composites such as phenolic resin, urea-formaldehyde resin, epoxy resin, and polyurethane, thermoplastic composites have some special properties:
Low density and high strength: The density of FRTP is 1.1-1.6g/cm3, which is only 1/5-1/7 of steel, 1/3-1/4 lighter than thermosetting FRP, and can be obtained with a smaller unit mass Higher mechanical strength and application grade.
Large degree of freedom in performance designability: The physical properties, chemical properties and mechanical properties of FRTP are designed through the reasonable selection of raw material types, proportions, processing methods, fiber content and layup methods. There are many more materials, so the freedom of material selection and design is also much greater.
Thermal properties: Generally, the operating temperature of plastic is 50-100℃, and it can be increased to above 100℃ after being reinforced with glass fiber. The heat distortion temperature of fiberglass chopped strands for PA6 is 65°C, and after reinforced with 30% glass fiber, the heat distortion temperature can be increased to 190°C. The heat resistance of PEEK reaches 220°C. After reinforced with 30% glass fiber, the operating temperature can be increased to 310°C. Thermosetting composite materials cannot achieve such high heat resistance.
Chemical resistance: It is mainly determined by the performance of the matrix material. There are many types of thermoplastic resins, and each resin has its own anti-corrosion characteristics. Therefore, the matrix resin can be optimized according to the use environment and medium conditions of the composite material. Generally, can meet the requirements of use. The water resistance of FRTP is also better than that of thermoset composites.
Electrical properties: FRTP generally has good dielectric properties, does not reflect radio waves, and transmits microwaves well. Because the water absorption rate of FRTP is smaller than that of thermosetting FRP, its electrical properties are better than the latter. After adding conductive material to FRTP, it can improve its conductivity and prevent the generation of static electricity.
Waste can be recycled: FRTP can be re-processed and formed, waste and leftovers can be recycled, and the physical and mechanical properties do not change significantly, and it will not cause environmental pollution. environmental requirements.
Classification of FRTP
CFRT can be recycled, has high specific strength and specific stiffness, good corrosion resistance, impact resistance, heat resistance, low cost and design flexibility, and has great application potential in automotive lightweight design, which can replace parts Metal materials and high-end polymer materials.
Applications of FRTP
With the emergence of aromatic thermoplastic resin matrix (such as PEEK, PPS) with excellent rigidity, heat resistance and medium resistance, as well as carbon fiber and aramid fiber with excellent properties such as high strength, high modulus, high temperature resistance and corrosion resistance , the development of high-performance fibers such as silicon carbide fiber, so that advanced FRTP is used in more and more industrial fields, such as: rail transit, automobile, aerospace, home appliances, electric power and other industries.
◆ Aerospace
FRTP's high stiffness, low processing costs and reworkability, good flame retardancy, low smoke and non-toxic properties, and cure cycles in minutes make it an ideal material for lightweight, low-cost aerospace structures.
In the structural parts of the aircraft body, FRTP is mainly used in the floor, leading edge, control surface and tail parts, which are secondary load-bearing components with relatively simple shapes. The Airbus A380 airliner, Airbus A350 airliner, Gulfstream G650 business jet and AgustaWestland AW169 helicopter are all major applications of thermoplastic airframe structures. The most important FRTP structure on the Airbus A380 is the fixed leading edge of the wing made of fiberglass/PPS material. The FRTP of the Airbus A350 airframe is mainly distributed on the movable spars and ribs and the fuselage connections. The Gulfstream G650 business jet is a milestone in FRTP applications with carbon fiber/PEI for pressure bulkhead ribs and carbon fiber/PPS for rudders and elevators.
◆ Cars
The development of low-cost, short-cycle and high-quality composite materials technology has become one of the key elements in promoting vehicle lightweighting. Many domestic car companies have already cooperated with injection molding equipment companies with advanced composite material technology. Applications of chopped strands in cars are: seats and their frames, window guides, door inner panels, bumper brackets, hoods, front brackets, footrests, instrument panel frames, air deflectors, compartment floors, spare parts Tire box, battery carrier, automobile intake manifold. In domestic cars, Passat, POLO, Bora, Audi A6, Golf, Buick Excelle, Buick GL8 commercial vehicle and other models have adopted a large number of high-performance FRTP parts, most of which use GMT or LFTIn the application of box trucks, it is mainly PP honeycomb composite board, which replaces the steel frame outer aluminum alloy small corrugated board and steel corrugated board in the current box truck.
◆ Rail Transit
According to the load-bearing characteristics, it can be roughly divided into two categories: the main load-bearing parts of composite materials and the non-main load-bearing parts of composite materials. The main load-bearing components of composite materials mainly refer to the large-scale load-bearing components of trains such as train body, driver's cab and bogie frame. The non-main load-bearing parts of composite materials can be divided into non-main load-bearing parts (such as body, floor and seat and other non-main load-bearing parts) and auxiliary parts (auxiliary parts such as washrooms, toilets and water tanks).
Market Status and Prospects
Nonetheless, once the technical quality meets the requirements, when the price and cost are reduced to the acceptable range of the market, and when the scientific research results are well transformed into productivity, with the With the rapid development of machinery and other industries, my country's FRTP industry is bound to usher in a new stage of development. In the next few years, it will gain more market opportunities and share space, and the prospects are still worth looking forward to.